14
3M? Multi-Touch Chassis Display User Guide
3M Touch Systems, Inc. Proprietary Information – TS
D-37732 REV H
Mounting the Multi-Touch Chassis Display
The Multi-Touch Chassis Display is designed to fit any type of enclosure. All 3M Touch
Systems chassis displays are encased in rugged metal instead of plastic, making them
easy to integrate.
Caution:
To avoid the risk of injury when handling the disp
lay be aware that the sensor
edges are very sharp.
The Multi-Touch Chassis Display includes a hardware
accessory kit for mounting the
unit into an enclosure. The hardware accessory kit includes four brackets and 8 screws.
The mounting holes are located on all 4 sides of the display. Always use the supplied
screws (M4 x 8 mm).
Caution: Always use the mounting holes when attaching to the
brackets. Do not drill
additional holes in the unit to mount brackets to other locations.
You can attach the brackets to the edges of the chassis. The brackets are slotted, allowing
the chassis to slide in and out. You can also rotate the brackets to various positions.
Note:
ESD susceptibility at the system level is dependent
on the integration
methodology. To ensure proper ESD protection for the chassis display in ESD sensitive
applications, 3M Touch Systems recommends that the perimeter of the display be
surrounded by an electrically insulating closed cell foam gasket.
Given the variety of factors that can affect the use and performance of any product, some
of which are uniquely within the user’s knowledge and control, it is essential that the
user evaluate the specific gasket to determine whether it is suitable for a particular
purpose and suitable for the user’s intended application.
Articulating Arm Mounting Option
The unit has a 100 mm VESA mounting pattern on the back to allow for arm mount
capability. Use M4 x 7 mm screws to secure the VESA
mount stand for use only with
UL listed wall mount bracket with minimum weight load capability of 20.28 lbs (9.2 kg).
Follow the manufacturer's instructions included with the mounting device to properly
attach your display.
Caution:
?
Do not use longer screws as they could potentially damage electronics inside the
display.
?
Always use the VESA mounting holes when using an arm attachment. Do not drill
additional holes in the unit to mount plates in other locations.
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
C25-0629
DISPLAY VFD CUSTOM DVD
C28-0605
VFD CUSTOM DVD DISP MULTI
C28-0704
DISPLAY VFD CUSTOM DVD
C2D10120D
DIODE SCHOTTKY 1200V 2x5A TO-247
C2D20120D
DIODE SCHOTTKY 1200V 22A TO-247
C3D20060D
DIODE SCHOT 600V 20A ZREC TO247
C40-0701A
DISPLAY VFD CUST APPLIANCE
C40-1405
DISPLAY VFD CUST ELEVATOR
相关代理商/技术参数
C2256-5
制造商: 功能描述: 制造商:RYESON CORPORATION 功能描述: 制造商:undefined 功能描述:
C22584-000
制造商:TE Connectivity 功能描述:MOLDED PART - Bulk 制造商:TE Connectivity 功能描述:322A024-4-0-CS8161
C225-AG
功能描述:开关配件 CAP SNPFIT GRN PB
RoHS:否 制造商:C&K Components 类型:Cap 用于:Pushbutton Switches 设计目的:
C225FL11047G6
功能描述:共模滤波器/扼流器 Ultra-Broadband Conical Inductors RoHS:否 制造商:TDK 电感: 阻抗:35 Ohms 容差: 最大直流电流:0.1 A 最大直流电阻:1.5 Ohms 自谐振频率: Q 最小值: 工作温度范围:- 25 C to + 85 C 端接类型:SMD/SMT 封装 / 箱体:0302 (0806 metric) 系列:TCE
C225FL2935G6
功能描述:共模滤波器/扼流器 Ultra-Broadband Conical Inductors RoHS:否 制造商:TDK 电感: 阻抗:35 Ohms 容差: 最大直流电流:0.1 A 最大直流电阻:1.5 Ohms 自谐振频率: Q 最小值: 工作温度范围:- 25 C to + 85 C 端接类型:SMD/SMT 封装 / 箱体:0302 (0806 metric) 系列:TCE
C225FL3536G6
功能描述:共模滤波器/扼流器 Ultra-Broadband Conical Inductors RoHS:否 制造商:TDK 电感: 阻抗:35 Ohms 容差: 最大直流电流:0.1 A 最大直流电阻:1.5 Ohms 自谐振频率: Q 最小值: 工作温度范围:- 25 C to + 85 C 端接类型:SMD/SMT 封装 / 箱体:0302 (0806 metric) 系列:TCE
C225FL4338G6
功能描述:共模滤波器/扼流器 Ultra-Broadband Conical Inductors RoHS:否 制造商:TDK 电感: 阻抗:35 Ohms 容差: 最大直流电流:0.1 A 最大直流电阻:1.5 Ohms 自谐振频率: Q 最小值: 工作温度范围:- 25 C to + 85 C 端接类型:SMD/SMT 封装 / 箱体:0302 (0806 metric) 系列:TCE
C225FL5740G6
功能描述:共模滤波器/扼流器 Ultra-Broadband Conical Inductors RoHS:否 制造商:TDK 电感: 阻抗:35 Ohms 容差: 最大直流电流:0.1 A 最大直流电阻:1.5 Ohms 自谐振频率: Q 最小值: 工作温度范围:- 25 C to + 85 C 端接类型:SMD/SMT 封装 / 箱体:0302 (0806 metric) 系列:TCE